Expert Answers about Chevrolet Drop Hitch

• Replacement Shank For Reese Pro Series 49903 Weight Distribution Hitch On a Lifted Truck
• Yes, we have another shank you can use with your Reese Pro Series weight distribution hitch 49903. The shank which comes with your hitch only allows for up to a 2" drop. We have the Shank # RP69FR which will allow for up to a 4" drop.
  view full answer...


• Replacement Weight Distribution Shank to Provide More Height Rise or Drop
• If you are referring to needing more rise or drop from the shank part of your Curt weight distribution system to allow your hitched trailer to remain level as it needs to in order to handle well, then you can refer to the linked page that displays all WD shanks that fit a 2-inch hitch receiver. I also linked the same parts for a 2-1/2-inch receiver size in case that is what is on your truck. These shanks range in the amount of rise or drop they offer. For instance, 2-1/2-inch Curt shank...
  view full answer...


• Picking Out Ball Mount and 2 inch Hitch Ball for Trailer that Needs 5-1/4 inch Drop
• When picking out the correct rise/drop ball mount for a towing setup you sometimes can't get exactly the amount you need. The good news is that if you get as close as you can (in your case within 1/2 inch) you will be fine. So using the hitch ball # 40038 that you referenced with the ball mount # C45240 would be a great choice and would work well for you.
  view full answer...


• Weight Distribution Recommendation for 500 lb Tongue Weight and 6 inch Drop Shank
• The best bargain orientated setup that covers everything you need would be the Reese weight distribution system part # RP66020 which has a tongue weight range of 200-600 lbs and also does not come with a shank so that you can select one that has more drop like you'd need. Then for a shank you'd need the # EQ90-02-4300 and you'd be set.
  view full answer...


• Replacement Drop Shank for Weight Distribution and 2-1/2 Inch Receiver
• The Reese Titan Weight Dist Shank - Trunnion Only - 5-3/4" Drop, 8-1/4" Rise - 1,700 lbs TW # RP54977 is a fit for your system. The Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitches - 9" Long - 9 Hole Adjustment # BXW4028, the Curt Weight Distribution Shank for 2-1/2" Hitches - 12" Rise - 9-1/4" Drop # C17132, the Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop # EQ34FR, and Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop # EQ94FR are all...
  view full answer...


• Replacement Weight Distribution Shank to Keep Hitched Trailer Level When Towed by Lifted Truck
• The shank component of a weight distribution system has standardized hole size and hole spacing so you can use any brand of shank to get you the rise or drop you need to keep your hitched trailer level with the ground. This ensures the best handling from the trailer. You can see all shanks on the linked page. Since your truck could have either a 2-inch or a 2-1/2-inch hitch be sure to click on the appropriate size shank at the top of the page. For each shank we will indicate the rise or...
  view full answer...


• Replacement 2-1/2 Inch Shank for Fastway e2 Weight Distribution System
• You do not need to replace your Fastway e2 Weight Distribution # FA92-00-0800. As you suspected, a new shank is all it will take to get you going again. Fastway doesn't have one for a 2-1/2" receiver, but Equal-i-zer who makes Fastway does. We have the following options available: -Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop # EQ90-02-4700 -Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop # EQ90-02-4800 -Equal-i-zer Weight Dist Shank - 2-1/2" Hitch...
  view full answer...


• Weight Distribution Shank for Curt Weight Distribution System that Needs 10 inch Drop
• For that much drop from a Curt weight distribution shank you'd need the # C17125 which has a 15,000 lb trailer towing capacity.
  view full answer...


• Weight Distribution Shank for 2-1/2-Inch Hitch That Allows Increased Height Drop
• Since weight distribution shanks are made to a common standard you can use any brand of 2-1/2-inch shank with your EAZ-Lift setup. Based on your dimensions you need a shank that will give you at least 4-inches of drop. The Equal-i-zer shank # EQ90-02-4900 that you referenced should work great since it gives up to 6-inches of drop (and so long as your actual tongue weight (TW) does not exceed its 1600-lb rating). Please refer to the linked photo of this part that has measurements. If...
  view full answer...


• Large Drop Shank Available for Fastway e2 Weight Distribution System
• The shank included with your Fastway e2 weight distribution system offers a maximum drop of 2 inches. To gain an additional 2 inches of drop, I'd recommend # EQ90-02-4300 which will offer a drop of up to 6 inches.
  view full answer...


• Replacement Hardware for Draw-Tite Hitch 76419 on 2019 Chevy Equinox
• There is replacement hardware available for the Draw-Tite Trailer Hitch # 76419 on your 2019 Chevy Equinox, the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is go to this product page, enter the model number of your hitch in the box that says "Hitch Item Number" and then select the correct manufacturer from the drop-down box. Simply enter "76419" in the "Hitch Item Number" box and select "Draw-Tite" from the drop-down menu. I have added a link to a video review...
  view full answer...


• Replacement Hardware for Curt Trailer Hitch on a 1999 Jeep Cherokee
• Yes, if you are on the replacement hardware kit page, # RHK, you would enter 13084 for hitch # 13084 where indicated for the hitch number and select Curt as the manufacturer to get the proper hardware for that hitch. I have also linked a video showing installation and the instructions to the right for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4...
  view full answer...


• Trailer Hitch Recommendation for 2018 Mitsubishi Outlander Sport
• For a 2018 Mitsubishi Outlander Sport the etrailer hitch part # e63AR is a confirmed fit and will work well. This is a 2 inch hitch which means it has higher capacities and has more accessories made for it. For trailer wiring you then would want the part # 118538 if you have LED lights or part # C59496 if you do not. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one...
  view full answer...


• 12 inch Long 2 inch Drop Ball Mount Recommendation
• The perfect ball mount for you is the part # D-26. It has a 2 inch drop, 1 inch ball hole, and is 12-5/8 inches from the hitch pin hole to the ball platform hole.
  view full answer...


• Replacement Hardware for Curt Trailer Hitch That Fits Ford Flex
• The replacement hardware for the Curt Trailer Hitch # 13551 that fits certain model years of Ford Flex you need Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is go to this product page, enter the model number of your hitch in the box that says "Hitch Item Number" and then select the correct manufacturer from the drop-down box. Simply enter "13551" in the "Hitch Item Number" box and select "Curt" from the drop-down menu. I have added a link to a video review of...
  view full answer...


• Recommended Trailer Hitch for a 2002 Acura MDX
• For your 2002 Acura MDX there are a few trailer hitch options. All of them are great and would essentially be just as good as the other. So because of that I would recommend the Curt part # 13328 if it were me as it is priced the best. I attached an install video for this for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch...
  view full answer...


• Trailer Hitch Recommendation for 2018 Toyota Tacoma for Towing Camper
• For your 2018 Toyota Tacoma the etrailer.com hitch part # E98905 is a really great choice and what I recommend for you to tow your camper. It has plenty of capacity, is easy to install without requiring drilling, and come with a limited lifetime warranty. For trailer wiring then we have the 7-way kit part # 22117 as a confirmed fit which will work great. It comes with everything needed to install. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900....
  view full answer...


• Mounting Hardware to Install Trailer Hitch Receiver on 2007 Nissan Quest
• Even if you had the hardware you would not want to reuse it on a hitch. The replacement hardware kit you need is # RHK. You'll need to in put the model number of the hitch receiver you have and then choose the manufacturer from the drop down. This way you'll get the exact hardware that was included with the hitch originally. For your 2007 Nissan Quest the Curt # C13563 is confirmed to fit. If you're going to be towing with your Quest you'll also need a wiring harness. The Tekonsha...
  view full answer...


• Needing Deeper Drop Shank for Husky HT32215 Center Line Weight Distribution System
• The shank originally supplied with your Center Line weight distribution allowed for a maximum of a 1-1/4 inch drop. Since the shanks are brand-interchangeable with identical spacing of the adjustment holes, you'll just need to find a shank that has a deeper drop. The # EQ90-02-4200 from Equal-i-zer would provide up to a 4 inch drop or the # EQ90-02-4300 would provide up to 6 inches of drop.
  view full answer...


• Replacement Hardware for Trailer Hitch on 2019 Jeep Wrangler
• There is replacement hardware available for the trailer hitch on your 2019 Jeep Wrangler, the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is go to this product page, enter the model number of your hitch in the box that says "Hitch Item Number" and then select the correct manufacturer from the drop-down box. For example, if you had the Draw-Tite # DT78MR on your '19 Wrangler you would simply enter "DT78MR" in the "Hitch Item Number" box and select "Draw-Tite"...
  view full answer...